ALL ACM, both friable and non-friable must be removed prior to a demolition by burning regardless of the amount.
Show All Answers
The purpose of this regulation is to protect public health by minimizing the release of asbestos when facilities that have asbestos-containing materials (ACMs) are demolished or renovated.
“Demolition” and “renovation” are defined in the regulation. You “demolish” a facility when you remove or wreck any load-supporting structural member of that facility or perform any related operations; you also “demolish” a facility when you burn it. You “renovate” a facility when you alter any part of that facility in any other manner. Renovation includes stripping or removing asbestos from the facility.
As defined in the regulation, a “facility” is any institutional, commercial, public, industrial, or residential structure, installation, or building (including any structure, installation, or building containing condominiums, or individual dwelling units operated as a residential cooperative, but excluding residential buildings with four or fewer dwelling units); any ship; or any active or inactive waste disposal site. Any building, structure, or installation that contains a loft used as a dwelling is not considered residential. Any structure, installation, or building that was previously subject to the Asbestos NESHAP is not excluded, regardless of its current use or function.
Residential buildings that have four or fewer dwelling units are not considered “facilities” unless they are part of a larger installation (for example, an army base, company housing, apartment or housing complex, part of a group of houses subject to condemnation for a highway right-of-way, an apartment which is an integral part of a commercial facility, etc.)
Mobile homes used as single-family dwellings are not subject to Asbestos NESHAP. Mobile structures used for nonresidential purposes are subject to NESHAP. Mobile home parks where the owner of the property owns more than 4 units are subject to the NESHAP.
Asbestos NESHAP regulations must be followed for all renovations of facilities with at least 260 linear feet of regulated asbestos-containing materials (RACM) on pipes, or 160 square feet of regulated asbestos-containing materials on other facility components, or 35 cubic feet off facility components where the amount of RACM previously removed from pipes and other facility components could not be measured before stripping. These amounts are known as the “threshold” amounts.
Asbestos NESHAP regulations must be followed for demolitions of facilities with at least 260 linear feet of regulated asbestos-containing materials (RACM) on pipes, 160 square feet of regulated asbestos-containing materials on other facility components, or at least 35 cubic feet off facility components where the amount of RACM previously removed from pipes and other facility components could not be measured before stripping. However, all demolitions must notify the appropriate regulatory agency, even if no asbestos is present at the site, and all demolitions and renovations are “subject” to the Asbestos NESHAP insofar as owners and operators must determine if and how much asbestos is present at the site.
No. The regulations which do apply are specified in 40 CF61.145 Paragraphs: (b)(1), (b)(2), (b)(3)(iii), (b)(4).
If, for safety reasons, the RACM in the facility is not removed prior to demolition, the RACM must be kept adequately wet during the wrecking operations. After wrecking, all the contaminated debris must be kept adequately wet until disposal. All contaminated debris that cannot be segregated and cleaned must be disposed of as asbestos waste.
Yes. Even after a renovation site is abandoned, it is still regulated by the Asbestos NESHAP.
You can locate consultants, contractors, and laboratories on the Asbestos Institute website.